USED 2500/1N


 

PERO Automatic Cleaning & Degreasing Systems
  • Closed loop vapor degreasing with sub-zero drying technology and sophisticated PLC control.
  • Rotary basket system with immersion, flooding, rinsing, ultrasonic and vapor cleaning cycles.
  • Continuous distillation and filtration ensures the highest level of cleanliness.
  • Fully integrated parts handling system using automatic conveyors.
  • Cleaning cycle times as low as 5 minutes.
  • Complies with the federal NESHAP's and state and local regulations for hazardous air pollutants.
  • Ultra low emissions and economical solvent consumption using EPA approved solvents.
  • Built to CE standard to ensure safety compliance.
  • 30 years experience in design and manufacture of closed loop degreasers
  • Over 3000 systems installed worldwide.

    • TECHNICAL DATA  
    Model 2500/0 2500/1 2500/2 2500/3 2500/4 2500/5
    External Plant Dimensions            
    Width inch 35 74 98 116 116 150
      mm 890 1870 2480 2960 2960 3800
    Depth inch 78 108 144 180 180 189
      mm 1990 2735 3650 4560 4560 4810
    Height inch 76 112 117 117 131 128
      mm 1920 2850 2970 2970 3505 3260
    Loading Height inch 32 35 35 35 41 43
      mm 800 900 900 900 1050 1100
    Transport Weight lbs 2650 5950 9340 14400 15450 24200
      kg 1200 2700 4200 6500 7000 11000
    Basket Dimensions (maximum)            
    Length inch 16.2 20.8 25 33 37.6 49.2
      mm 370 530 660 840 906 1250
    Width inch 9.7 14.3 18 23 33.5 33.5
      mm 220 365 480 600 850 850
    Height inch 5.2 9.8 11 11 19.7 38.2
      mm 200 250 300 300 500 970
    Basket Weight lbs 110 176 440 440 440 2200
      kg 50 80 200 200 200 1000
    PERFORMANCE DATA  
    Model 2500/0 2500/1 2500/2 2500/3 2500/4 2500/5
    Average Cleaning Duration for steel mins/lb 4/110 4/110 5/154 8/220 8/220  
        mins/kg 4/50 4/50 5/70 8/100 8/100 20/1000
    Average Perchloroethylene distillation vote gal/h 23 58 88 87 89 99
      l/h 90 220 340 340 340 380
    Electrical Connection   with electric heating KVA (kW) 17 39 65 102 125 140
    Supply Voltage, AC 3 phase V/Hz 480/60 480/60 480/60 480/60 480/60 480/60
    Control Voltage, DC V/Hz 230/24 230/24 230/24 230/24 230/24 230/24
    Cooling Water gpm 1.7 3.9 7.0 7.0 7.0 7.8
     Requirement approx. at t = 27° C (80 F°) m3/h 0.4 0.9 1.53 1.53 1.53 1.7

    DEMO 2500/0V


     

    DEMO 2500/1V

    PERO Vacuum Automatic Cleaning & Degreasing Systems
    PERO Vacuum Degreasing automatic cleaning machines permit the safe and economical use of solvents. They ensure a high throughput with consistent cleaning quality and are easy to operate. The series of models offers the user major advantages:

  • universal applications
  • user-friendly layout
  • economical operation
  • high-quality components
  • intelligent controls
  • can be expanded with special options
  • environmentally compliant · comprehensive service package

  • Closed loop vapor degreasing with vacuum drying technology and sophisticated PLC control.
  • Rotary basket system with immersion, flooding, rinsing, ultrasonic and vapor cleaning cycles.
  • Continuous distillation and filtration ensures the highest level of cleanliness.
  • Fully integrated parts handling system using automatic conveyors.
  • Cleaning cycle times as low as 5 minutes.
  • Complies with the federal NESHAP's and state and local regulations for hazardous air pollutants.
  • Ultra low emissions and economical solvent consumption using EPA approved solvents.
  • Built to CE standard to ensure safety compliance.
  • 30 years experience in design and manufacture of closed loop degreasers
  • Over 3000 systems installed worldwide.
     

    •  

    TECHNICAL DATA  
    Model 2500/0 2500/1 2500/2 2500/3 2500/4 2500/5
    External Plant Dimensions            
    Width inch 35 74 98 116 116 150
      mm 890 1870 2480 2960 2960 3800
    Depth inch 78 108 144 180 180 189
      mm 1990 2735 3650 4560 4560 4810
    Height inch 76 112 117 117 131 128
      mm 1920 2850 2970 2970 3505 3260
    Loading Height inch 32 35 35 35 41 43
      mm 800 900 900 900 1050 1100
    Transport Weight lbs 2650 5950 9340 14400 15450 24200
      kg 1200 2700 4200 6500 7000 11000
    Basket Dimensions (maximum)            
    Length inch 16.2 20.8 25 33 37.6 49.2
      mm 370 530 660 840 906 1250
    Width inch 9.7 14.3 18 23 33.5 33.5
      mm 220 365 480 600 850 850
    Height inch 5.2 9.8 11 11 19.7 38.2
      mm 200 250 300 300 500 970
    Basket Weight lbs 110 176 440 440 440 2200
      kg 50 80 200 200 200 1000
    PERFORMANCE DATA  
    Model 2500/0 2500/1 2500/2 2500/3 2500/4 2500/5
    Average Cleaning Duration for steel mins/lb 4/110 4/110 5/154 8/220 8/220  
        mins/kg 4/50 4/50 5/70 8/100 8/100 20/1000
    Average Perchloroethylene distillation vote gal/h 23 58 88 87 89 99
      l/h 90 220 340 340 340 380
    Electrical Connection   with electric heating KVA (kW) 17 39 65 102 125 140
    Supply Voltage, AC 3 phase V/Hz 480/60 480/60 480/60 480/60 480/60 480/60
    Control Voltage, DC V/Hz 230/24 230/24 230/24 230/24 230/24 230/24
    Cooling Water gpm 1.7 3.9 7.0 7.0 7.0 7.8
     Requirement approx. at t = 27° C (80 F°) m3/h 0.4 0.9 1.53 1.53 1.53 1.7

    DEMO ROTIMAT 3/U


     

    The Rotating Basket Washing Systems ROTIMAT 3/U are compact, self-standing systems, that are transportable as a single unit. The factory floor is a suitable set-up surface. Special preparation is not necessary. Simply connect the various utilities, after that the machine can be filled, heated and put into operation. All models are filled, heated and undergo a test run before dispatch.

        TECHNICAL DETAILS
    ROTIMAT 3/U Technical Data
    Basket Dimensions L x W x H inches (mm)   26 x 19 x 12
    Basket Capacity   max lbs. Kg   330 (150)
    Loading Height   inches (mm)   36 (915)
    Tank Capacity Wash Bath gal (liters)   120 (45)
      Rinse Bath gal (liters)   131 (500)
    Basket Rotation Device Motor hp (kW)   .2 (.15)
      Revolutions rpm   4.1
    Exhaust Blower Output ft3/min (m3/min)   865 (24)
      At at(bar)   0.005
      Connection hp (kW)   .115/1.36 (0.085/1.0)
    Wash Pump Output gpm (l/min)   184 (700)
      At at(bar)   2.5
      Connection hp (kW)   7.5 (5.5)
    Rinse Pump Output gpm (l/min)   184 (700)
      At at(bar)   2.5
      Connection hp (kW)   7.5 (5.5)
    Connected Load w/ Electric Heat KVA (kW)   52
      w/ Foreign Heat KVA (kW)   7
    Heating Current   KVA (kW)   18+27
    Main Voltage (Primary) V, Hz   400/230, 50
    Control Voltage (Secondary) V   230 AC
    Outer Dimensions Width inches (mm)   128 (3250)
      Depth inches (mm)   67/114 (1700/2900)
      Height inches (mm)   83 (2100)
    Net Weight without auto conveyor lbs. Kg   3750 (1700)
      with auto conveyor lbs. Kg   4850 (220)

    DEMO ROBOMAT 3/U

    Single chamber wash system ROBOMAT/U is applied for very demanding cleaning requirements of parts surfaces, for example before phosphating, painting or before final assembly.In the system there are two automatic operations:
    • Washing of the parts to remove dirt and chips with detergent concentrations 2-5 %.
    • Rinsing of the parts with clear rinse and detergent concentration 0.5-1%.

    The rinse operation removes, besides the additional washing effect, the wash detergent residue from the parts.

    The washing and rinsing fluids are returned to their respective tanks through drain flaps in the work chamber.

    After the cleaning cycle is over the safety door raises 4 inches. The drying operation is enhanced by the blower exhausting the vapor mist and drawing air from the room into the chamber.

    TECHNICAL DETAILS  
    ROBOMAT   size 2/U 3/U 4/U 6/U 7/LU 8/U 9/U 10/U 11/U 21/U 32/U
    Useable Length inch 60 82 100 138 63 82 120 165 205 82 125
    Useable Width inch 33 33 33 33 41 41 41 41 41 50 50
    Loading Height inch 37 37 37 37 40 40 40 40 40 55 55
    Useable Height inch 28 28 28 28 38 38 38 38 38 57 57
    Useable Height x Width                      
    Example 1 inch 26 x 16 35 x 20 52 x 43
    Example 2 inch 22 x 28 32 x 32 50 x 47
    Example 3 inch 18 x 34 28 x 40 47 x 50
    Weight Capacity lbs 2200 3300 4400 4400 3300 4400 4400 3300 6600 4400 6600
    Outside Dimensions                      
    Length inch 142 165 181 228 153 165 208 256 307 150 244
    Width inch 71 71 71 71 79 79 79 79 79 112 112
    Height inch 95 95 95 95 106 106 106 106 106 138 138
    Vol. Wask Tank (2 each) US gal 170 210 235 290 224 263 340 447 540 290 380
    Wash & Rinse Pump                      
    Vol at 45 psi (each) ft3/min 158 237 290 395 250 263 395 500 526 263 395
    el. con. (each) hp 7.5 10 10 15 10 10 15 15 20 10 15
    Exhaust Ventilator                      
    Vol. at 20/90 psi ft3/min 2520 250 5400 5400 2520 5400 5400 5400 2 x 5400 5400 5400
    el.con. hp 0.4 0.4 1.4 1.4 0.4 1.4 1.4 1.4 2 x 1.4 1.4 3.4
    Exhaust Tube Dia. inch 16 16 20 20 16 20 20 20 20 20 16
    Heating Power (W+R) kVA 18+18 27+18 27+27 45+36 27+18 27+27 45+36 45+36 48+36 27+27 45+45
    resp. kcal/h 31000 39000 47000 70000 39500 46500 70000 70000 72000 60000 80000
    Heating Time h 2 2 2 2 2 2 2 2 2 2 2
    Total Electrical Load                      
    with electrical heating kVA 42,0 53,0 63,0 94,0 53,0 63,0 95,0 95,0 103,0 64,0 105,0
    without electrical heating kVA 6,0 8,0 9,0 13,0 8,0 9,0 14,0 14,0 19,0 10,0 15,0
    Machine Weight lbs 2860 3310 3750 4400 3750 4850 6610 7500 9920 12500 17650
    Rot. Spray Pipe rpm 2 2 2 2 2 2 2 2 2 2 2
    Drive hp .2 .2 .2 .2 .2 .2 .2 .2 .5 .5 .5
    Automatic Door Drive hp --- --- --- --- --- --- .35 .35 .75 .6 .6
    Main Voltage                      
    (for USA 460/480 V / 60 Hz) 400/230 V, 50 Hz 400/230 V, 50 Hz 400/230 V, 50 Hz
    Control Voltage 24 V, DC 24 V, DC 24 V, DC